Chandeliers go beyond only a light fixture.
However, they can also be used as decorators for the interior, and to installing of a chandelier isn’t so simple.
The package is opened and you can check the parts as per the directions.
Chandeliers don’t only provide ornamental lighting, they also contain numerous accessories.
It’s not well-known. New installers should check all the parts in line with the bulb’s installation instructions.
If you discover a mistake in the place, you can contact the seller in time.
The customer has to be present when the lighting host is opened. Installation can only be confirmed when the lighting doesn’t be in trouble.
Installation of the chandelier
1.First build the lamp’s body of the chandelier as well as thesurrounding arms of the lamp (where the lamp is mounted).
2.After taking apart the strip of light body as illustrated in the image above it is possible to determine where the light arms could be connected.
The lamp arms must then be fixed each one by one with a wrench following the connection of the lamp arm. The lamp arms must be evenly distributed following installation. Otherwise the installation will be complete. The chandelier needs to be angled toward the side of the larger arm.
3.Connect the different wires on the lamp arm correctly. Don’t connect the wrong wire. If you replace a light bulb only to discover that one of the arms isn’t lit then you’ll need to take it off to perform maintenance.
4.Installed the Slings and slings that are attached to the chandelier’s body and the lamp. At this point the chandelier has been put together and the base (i.e. the top plate) is installed.
Install the ceiling light holder at the position you want to install it in.
The procedure for installation is similar to the installation procedure of a ceiling lamp. Press the lamp holder onto the hole and then pull it out. Next, use a drill drill the hole. Fix the lamp holder.
Connect the main power source for your ceiling to the chandelier’s power source.
7. Adjust the height of the assembly and attach the glass bowl and shell above the arm.
8.Finally place the decorative cover (that is the cover that is placed on the base) Then, turn off the power source to check whether the chandelier will start normally.
You should also pay close attention to the following points:
Fix chandelier on ceiling hole
The first method for installing a chandelier is embedded. Install a metal sheet over the ceiling. Then, fix several protruding braces on the backside of the LED panel lights. Then, you can place your panel in the bracket that is in line with the slot for the sheet of metal. It is able to be attached to the ceiling. The light surface and the bracket must be adjusted to compensate for the thickness of the ceiling. In other cases the LED panel would be installed higher or lower.
Installing the second method is simple: install some screws into the ceiling. Slide intothe frame of the ceiling. After that, install the light onto the ceiling. The panel light will then be put into a fixed frame. Simple and quick.
The third installation method is the hanging wire type first, you must fix the hanging wire installation part to the ceiling and lock the screws (the hanging wire is installed in the factory.) The wire hanging is vertical and the parts are hanging from the back LED panel light. Installation and savings are simple. Customers should be cautious to determine if the suspension parts are standard or optional components.
Installation Precautions
- Please do not exceed the working voltage of this product.
- Before installation, please ensure that the power is shut off.
- Please carefully read the instructions before installing any device.
- Be sure to look for the following: shockproof, waterproof, and electricity-proof;
- This product is intended for indoor use only.
How do you install a chandelier with a ceiling connection?
- Decorate the device for connection with iron or wooden parts to adjust the angle of the chandelier according to it. It could be welded to, nailed, screwed or screwed. The chandelier’s installation is close to being completed once you have completed the steps.
- The location you choose for the chandelier based on the height it is installed at in the living room. In this way you will avoid putting wires into ceilings.
- The decorative materials must be incorporated into the structural layer. Be sure the placement is accurate and keep specific positions to allow for adjustments of the chandelier.
- Connect booms and connect devices.
the final point:
It’s definitely not advisable to put chandeliers in normal commercial properties, particularly ones with low floor elevations.
The majority of chandeliers are now emitting the light upwards. It is recommended to install these with spotlights or downlights to make them a traditional ceiling mode.
Today, many chandeliers utilize GU10 series lighting bulbs for their lighting sources. They are very powerful, cannot dissipate heat, and are more prone to breakage. The traditional E27 or E14 bulbs require a larger lampshade and lamp head, which may make you feel low.
Installing a practical and convenient chandelier is highly recommended. Of course, it can also be set to alter the light level and color temperature.